Toys | Road Barriers | Manhole Units | Tanks | Special questions

Toys
Q: Are they suitable for inside or outside use?
A: The toys are suitable for both inside and outside use.

Q: Is the material dangerous?
A: The material is not dangerous and it is non-toxic.

Q: Does the color fade with time?
A: The color is homogeneous and part of the process, therefore, the color is not only on the outside.

Q: What ages are your toys suitable for?
A: Modu-blocks are suitable for the ages 2-10 years.
The Spin-Dish is suitable for ages 2 months - 4 years.
The Polytop is suitable for ages 3-10 years.




New Jersey Road Barriers
Q: What is the weight of the road barriers?
A: Weight when the road barrier is filled with water is 200KG (total 230 KG).
The empty weight is 30KG, easily lifted by two people.

Q: What is the life expectancy of a road barrier?
A: Tens of years, in all kinds of weather conditions.

Q: Are the road barriers available in different colors?
A: For large quantities, it is possible to order the units in different colors in accordance with the requirements of the client.

Q: What are the road barriers used for?
A: For doing development work on road where there is the need to move the road barriers from one place to another.
For parking lots of sport grounds or entertainment halls when there is a need to change the direction of the traffic for entrances and exits.




Manhole Control for Sewage Units
Q: What is the advantage of manhole control for sewage units made of plastic material (Polyethylene) in comparison to a manhole made of concrete?
A: Excellent durability to chemicals, therefore it has a long life.
Excellent sealing, therefore it protects the environment.
Easy and quick installation and therefore saves both time and money.

Q: Is there a problem of roots penetrating the manhole control unit?
A: This is a further advantage, the plastic is not penetrable and therefore the roots are prevented from entering into the manhole control unit.

Q: Is it possible to repair the control unit made of Plastic?
A: It is very easily repaired if there is a need with the help of a simple welding instrument.

Q: Are manholes made of plastic strong enough?
A: The technology makes it possible to produce products with a high wall thickness which gives a mechanical strength and excellent durability to impact.

Q: Is there lengthy experience in the use of plastic manholes?
A: There is over 10 years of experience in the use of manholes of this kind. The direction seems to be that the use of plastic materials for manholes, pipes and underground products is on the increase.

Q: Is the material environmentally friendly?
A: The material is not poisonous and is not dangerous. It is recyclable without any problem.




Tanks
Q: Does the material allow the use of consumable foods?
A: The material is certified for the storage of food by different standard institutes, including the FDA.

Q: What is it possible to store in tanks?
A: The tanks are suitable for the storage of liquids such as water, food materials and for the storage of many kinds of chemicals including dangerous acids.

Q: Are the tanks suitable for indoor/outdoor use?
A: The tanks have excellent durability to all kinds of weather conditions. The tanks have certified durability against UV rays of the sun, rain and temperatures lower than -30 degrees Celsius.

Q: What are the advantages in comparison with a metal tank?
A: Plastic tanks are:
- low in weight
- do not rust
- it is possible to repair the tanks easily
- they are recyclable
- it is possible to add inlets and outlets very easily




Special Products in Accordance with client orders
Q: What are the types of products suitable for manufacturing by the Rotational Molding Technology?
A: Products of large volume and big size, which have complicated shapes.

Q: What range of quantities are suitable for production by Rotational Molding?
A: This type of technology is suitable for small and medium quantities from a few hundred - to tens of thousands of products per year.

Q: What types of materials are suitable for Rotational Molding?
A: The most commonly used material is Polyethylene, also possible is Polypropylene, Nylon, PVC and other materials.

Q: How do we check if a certain product is suitable for this kind of technology?
A: Send a simple sketch or diagram along with a basic question sheet to use and we will send you an answer sheet of the main possibilities by return.